If you have a problem with a blocked sink Greenwich, it is important to conduct careful inspection on the sink. The sink links to a pipe and lines that often cause clogging due to obstructions. If the water can’t get in the drain and overflow, this could mean a problem down there.Using a plunger, try flushing out the objects in the drain to release the blockage. This should work, but if it doesn’t you need more effort to put pressure on the hole. You can add a damp cloth to cover the holes so it can have more pressure once you use the plunger.Rinsing outPlunging may not work sometimes, so you need to have new steps like plugging the hole and adding a bucket under the sink pipe. Try to unlock the pipe using a screwdriver and let the water run thoroughly. Usually, the blockage also flows out or you can use wire or a hanger to take the blockage out of the drain. Don’t forget to properly connect the pipe once again using a screwdriver to secure it. Then pour boiled water with baking soda down the drain for maintenance.Sometimes it takes dismantling the pipe because it would be easier to take out the clog when you know where the root is. Putting a bucket to catch the water will save you from a messy, wet floor. It is important to wear safety gloves or a mask to avoid the odor. Once you have done this, you should be able to reassemble the pipe once again. It is vital to put the system back together and to try to add disinfectant from the plug hole. This should save you from growing bacteria that may lead to unwanted hygiene related diseases. “